| Double grousers | ||||
|---|---|---|---|---|
| Section | Weigth | Dimensions | ||
| A | B | E | ||
| kg/m | mm | mm | mm | |
| TS2-49 | 48,52 | 250,00 | 49,50 | 15,00 |
| TS2-66 | 66,35 | 261,00 | 46,00 | 25,00 |
| TS2-73 | 73,70 | 306,00 | 50,00 | 20,50 |
| TS2-73B | 80,78 | 306,00 | 50,00 | 23,50 |
| TS2-104 | 104,12 | 330,00 | 50,00 | 35,00 |
| Triple grousers | ||||
|---|---|---|---|---|
| Section | Weigth | Dimensions | ||
| A | B | E | ||
| kg/m | mm | mm | mm | |
| TS3-27 | 27,80 | 219,00 | 30,00 | 8,50 |
| TS3-27B | 30,30 | 219,00 | 30,00 | 10,00 |
| TS3-27C | 32,08 | 219,00 | 30,00 | 11,00 |
| TS3-28AA | 26,50 | 217,50 | 26,00 | 8,50 |
| TS3-28A | 27,20 | 217,50 | 26,00 | 9,00 |
| TS3-28 | 28,87 | 217,50 | 26,00 | 10,00 |
| MR0 | 29,50 | 203,00 | 25,30 | 12,70 |
| TS3-32 | 32,64 | 222,50 | 28,00 | 12,50 |
| TS3-38 | 38,92 | 240,00 | 26,50 | 13,00 |
| TS3-38B | 42,55 | 240,00 | 26,50 | 15,00 |
| TS3-40 | 40,27 | 247,00 | 36,00 | 11,00 |
| TS3-40B | 44,12 | 247,00 | 36,00 | 13,00 |
| TS3-45 | 45,48 | 254,50 | 37,00 | 13,00 |
| TS3-48 | 48,01 | 253,00 | 30,50 | 16,50 |
| TS3-51 | 51,10 | 254,50 | 37,00 | 16,00 |
| TS3-55 | 55,09 | 254,50 | 37,00 | 18,00 |
| TS3-60 | 60,46 | 254,50 | 37,00 | 20,50 |
| MR6 | 69,80 | 266,00 | 30,00 | 30,00 |
| Steel grades |
|---|
| Steelgrades ArcelorMittal Commercial RPS proposes mainly two steel grades for Track Shoes. TSG 100 is a softer grade used to fulfill the requirements of material like 24MnCrB4 or 26MnB5 or equivalent. TSG 200 is harder and used for material like 28MCB6 or equivalent. Both grades contain boron, titanium and chromium to ensure a good hardenability. To ensure also a good internal metal soundness, the sulfur and phosphorus contents are always on 0,035%. |
| Track Shoes Grades | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Grade | Lim | C | Mn | S | P | Si | Cr | Ti | B | Mo |
| TGS 100 | min | 0,22 | 1,00 | 0,15 | 0,25 | 0,02 | 0,0005 | |||
| max | 0,28 | 1,30 | 0,035 | 0,035 | 0,35 | 0,45 | 0,05 | 0,0030 | 0,05 | |
| TGS 200 | min | 0,24 | 1,00 | 0,15 | 0,45 | 0,02 | 0,0005 | |||
| max | 0,30 | 1,30 | 0,035 | 0,035 | 0,35 | 0,66 | 0,05 | 0,0030 | 0,05 | |
The Jominy curve limits (min-max) are given for the depths currently used on ArcelorMittal Commercial RPS mill certificates. Other depths and limits can be agreed with the customer and reported on the mill certificates on request. Mill certificates are according to EN 10204 type 3.1.
| Single grousers | ||||
|---|---|---|---|---|
| Section | Weigth | Dimensions | ||
| A | B | E | ||
| kg/m | mm | mm | mm | |
| TS1-31 | 30,57 | 232,50 | 65,00 | 12,00 |
| TS1-32A | 31,10 | 236,50 | 58,70 | 13,30 |
| TS1-32 | 32,20 | 236,50 | 58,70 | 13,80 |
| TS1-38 | 38,20 | 245,00 | 71,50 | 14,70 |
| TS1-53 | 53,90 | 242,50 | 84,00 | 19,00 |
| TS1-56A | 50,90 | 260,00 | 77,50 | 16,50 |
| TS1-56 | 55,88 | 260,00 | 77,50 | 19,00 |
| TS1-56L | 56,33 | 264,00 | 77,50 | 19,00 |
| TS1-71 | 71,05 | 301,00 | 87,50 | 20,50 |
| TS1-73 | 73,51 | 305,00 | 93,00 | 20,50 |
| The Jominy hardenability for Track Shoes | ||||||
|---|---|---|---|---|---|---|
| Nuance | Hrc | J2 | J13 | J19 | J25 | mm |
| Nuance | HRc | J1 | J8 | J12 | J16 | 1/16″ |
| TGS100 | min | 45 | 35 | 28 | ||
| max | 52 | 48 | 35 | |||
| TGS200 | min | 45 | 38 | 33 | ||
| max | 52 | 52 | 42 | |||
Product Contact
Giada Guffanti – Sales Special Sections
ArcelorMittal Europe. Long Products – Rails & Special Sections
66, Rue de Luxembourg
L-4221 Esch sur Alzette | G.D. of Luxembourg
rails.specialsections@arcelormittal.com
